波兰索耐Sonel MPI-540-PV光伏安规测试仪-京海兴乐科技（北京）有限公司

当前位置：

首页 > 技术文章 > 波兰索耐Sonel MPI-540-PV光伏安规测试仪

目录导航 Directory

热点新闻 HotROME+

2020年展会将于12月16-18日在上海新博览中心

技术支持Article

波兰索耐Sonel MPI-540-PV光伏安规测试仪

点击次数：900 更新时间：2020-11-20

波兰索耐Sonel MPI-540-PV光伏安规测试仪|京海兴乐科技（北京）有限公司提供

Sonel MPI-540-PV是一种非常通用的仪表，特别为测试光伏装置而设计。根据en62446标准的指导原则，该设备允许在直流和交流侧进行一整套测试。测量光伏安装相关参数时，仪器会自动将其转换为STC(标准测试条件)参考条件。测量逆变器交流和直流侧的电压、电流和功率可以验证其效率。Sonel Reports PLUS软件可以使用存储在内存中的测量结果创建PV安装测试报告。

Sonel MPI-540-PV:根据EN-62446标准测量光伏装置

Sonel MPI-540-PV:使用Sonel Reports PLUS软件的光伏安装测试报告

三相电源记录器-*的电源质量诊断

实时显示网络参数-立即评估测试场地条件

根据en61000 -4-30标准的S级测量参数-测量精度高

能源成本计算器-潜在节约的快速评估

测量所有与接地和电击保护有关的参数-一个而不是几个装置

快速测量的故障环路阻抗在网络安全与RCD没有触发(高达几秒钟)-节省时间

自动测量-能够执行自动测量顺序-简化测量

从测量到报告的快速路径-节省时间

市场上大的触摸屏(7英寸)-的人体工程学和易用性

可移动microSD记忆卡-轻松增加记忆容量

锂离子电池-更长时间的操作表

Specifications – photovoltaic installation parameters

Open circuit voltage U_OC

Display range	Resolution	Accuracy
0,0 V…1000 V	from 0,1 V	from ±(3% m.v. + 2 digits)

Short circuit current I_SC

Display range	Resolution	Accuracy
0,00 A…20,00 A	0,1 A	±(3% m.v. + 0,10 A)

Specifications – electrical installation parameters

Measurement of short circuit loop impedance Z_L-PE, Z_L-N, Z_L-L
Test current: 23/40 A; measuring range acc. to IEC 61557: 0,13...1999,9 Ω (for 1.2 m test lead):

Display range	Resolution	Accuracy
0,000...19,999 Ω	0,001 Ω	±(5% m.v. + 30 digits)
20,00...199,99 Ω	0,01 Ω	±(5% m.v. + 30 digits)
200,0...1999,9 Ω	0,1 Ω	±(5% m.v. + 30 digits)

rated voltage: 95...270 V (for Z_L-PE and Z_L-N) and 95...440 V (for Z_L-L)
frequency: 45...65 Hz

Measurement of short circuit loop impedance Z_L-PE in RCD mode
Test current: 15 mA, measuring range acc. to IEC 61557: 0,50...1999 Ω

Display range	Resolution	Accuracy
0,00...19,99 Ω	0,01 Ω	±(6% m.v. + 10 digits)
20,0...199,9 Ω	0,1 Ω	±(6% m.v. + 5 digits)
200...1999 Ω	1 Ω	±(6% m.v. + 5 digits)

rated voltage: 95...270 V
frequency: 45...65 Hz

Measurement of earth resistance R_E with the 3p and 4p method
Measuring range acc. to IEC 61557-5: 0,50 Ω…1,99 k Ω for test voltage 50 V 0,56 Ω …1,99 k Ω for test voltage 25 V

Display range	Resolution	Accuracy
0,00...9,99 Ω	0,01 Ω	±(2% m.v. + 4 digits)
10,0...99,9 Ω	0,1 Ω	±(2% m.v. + 3 digits)
100...999 Ω	1 Ω	±(2% m.v. + 3 digits)
1,00...1,99 kΩ	0,01 kΩ	±(2% m.v. + 3 digits)

test voltage: 25 V or 50 V rms
test current: 20 mA, sinusoidal rms 125 Hz (for f_n = 50 Hz) and 150 Hz (for f_n = 60 Hz)
measurement blocked at interference voltage U_N > 24 V
maximum measured interference voltage U_nmax = 100 V
maximum resistance of auxiliary earth electrodes 50 kΩ

Selective earth resistance measurement with clamp (3p + clamp)
Measuring range acc. to IEC 61557-5: 1 Ω…1,99 kΩ

Display range	Resolution	Accuracy
0,00...9,99 Ω	0,01 Ω	±(2% m.v. + 4 digits)
10,0...99,9 Ω	0,1 Ω	±(2% m.v. + 4 digits)
100...999 Ω	1 Ω	±(2% m.v. + 4 digits)
1,00...1,99 kΩ	0,01 kΩ	±(2% m.v. + 4 digits)

measurement with additional current clamp
interference current measuring range: up to 9,99 A

Selective earth measurement with two clamps

Display range	Resolution	Accuracy
0,00...9,99 Ω	0,01 Ω	±(10% m.v. + 4 digits)
10,0...19,9 Ω	0,1 Ω	±(10% m.v. + 4 digits)
20,0...99,9 Ω	0,1 Ω	±(20% m.v. + 4 digits)

measurement with transmitting and receiving clamps
interference current measuring range: up to 9,99 A

Soil resistivity mesurement (ρ)

Display range	Resolution	Accuracy
0,00...9,99 Ω	0,01 Ω	±(2% m.v. + 4 digits)
10,0...99,9 Ω	0,1 Ω	±(2% m.v. + 4 digits)
100...999 Ω	1 Ω	±(2% m.v. + 4 digits)
1,00...1,99 kΩ	0,01 kΩ	±(2% m.v. + 4 digits)

measurement with Wenner’s method
distance settable in metres or feet
distance range: 1...30 m (1...90 feet)

Phase sequence indication

phase sequence indication: conforming, non-conforming
mains voltage range U : 100...440 V (45...65 Hz) L-L
display of phase-to-phase voltage values

Measurements of RCD parameters (voltage range 95...270 V):
RCD tripping test and measurement of tripping time t_A (for t_A measurement function)

RCD type	Current	Range	Resolution	Accuracy
General and short-time delay	0,5*I_Δn	0...300 ms	1 ms	±(2% m.v. + 2 digits) (for RCD with I_Δn = 10 mA and 0,5xI_Δn uncertainty: ±(2% m.v. +3 digits)
General and short-time delay	1*I_Δn	0...300 ms	1 ms	±(2% m.v. + 2 digits) (for RCD with I_Δn = 10 mA and 0,5xI_Δn uncertainty: ±(2% m.v. +3 digits)
General and short-time delay	2*I_Δn	0...150 ms	1 ms	±(2% m.v. + 2 digits) (for RCD with I_Δn = 10 mA and 0,5xI_Δn uncertainty: ±(2% m.v. +3 digits)
General and short-time delay	5*I_Δn	0...40 ms	1 ms	±(2% m.v. + 2 digits) (for RCD with I_Δn = 10 mA and 0,5xI_Δn uncertainty: ±(2% m.v. +3 digits)
Selective	0,5*I_Δn	0...500 ms	1 ms	±(2% m.v. + 2 digits) (for RCD with I_Δn = 10 mA and 0,5xI_Δn uncertainty: ±(2% m.v. +3 digits)
Selective	1*I_Δn	0...200 ms	1 ms	±(2% m.v. + 2 digits) (for RCD with I_Δn = 10 mA and 0,5xI_Δn uncertainty: ±(2% m.v. +3 digits)
Selective	2*I_Δn	0...200 ms	1 ms	±(2% m.v. + 2 digits) (for RCD with I_Δn = 10 mA and 0,5xI_Δn uncertainty: ±(2% m.v. +3 digits)
Selective	5*I_Δn	0...150 ms	1 ms	±(2% m.v. + 2 digits) (for RCD with I_Δn = 10 mA and 0,5xI_Δn uncertainty: ±(2% m.v. +3 digits)

accuracy of residual current application: for 0,5*I_Δn:-8...0% for 1*I_Δn, 2*I_Δn, 5*I_Δn: 0...8%
measurement of RCD tripping current I_Δn for sinusoidal residual current (AC type)

Rated current	Meas. range	Resolution	Test current	Accuracy
10 mA	3,3...10,0 mA	0,1 mA	0,3 x I_Δn...1,0 x I_Δn	± 5% I_Δn
30 mA	9,0...30,0 mA	0,1 mA	0,3 x I_Δn...1,0 x I_Δn	± 5% I_Δn
100 mA	33...100 mA	1 mA	0,3 x I_Δn...1,0 x I_Δn	± 5% I_Δn
300 mA	90...300 mA	1 mA	0,3 x I_Δn...1,0 x I_Δn	± 5% I_Δn
500 mA	150...500 mA	1 mA	0,3 x I_Δn...1,0 x I_Δn	± 5% I_Δn
1000 mA	330...1000 mA	1 mA	0,3 x I_Δn...1,0 x I_Δn	± 5% I_Δn

the measurement can be started from positive or negative half-period of forced leakage current (AC)

Measurement of RCD tripping current I_A for unidirectional residual current and unidirectional with the 6 mA DC bias (type A)

Rated current	Meas. range	Resolution	Test current	Accuracy
10 mA	3,5...20,0 mA	0,1 mA	0,35 x I_Δn...2,0 x I_Δn	± 10% I_Δn
30 mA	10,5...42,0 mA	0,1 mA	0,35 x I_Δn...1,4 x I_Δn	± 10% I_Δn
100 mA	35...140 mA	1 mA	0,35 x I_Δn...1,4 x I_Δn	± 10% I_Δn
300 mA	105...420 mA	1 mA	0,35 x I_Δn...1,4 x I_Δn	± 10% I_Δn
500 mA	175...700 mA	1 mA	0,35 x I_Δn...1,4 x I_Δn	± 10% I_Δn

measurement for positive or negative half-periods of forced leakage current

Measurement of RCD tripping current I for direct residual current (type B)

Rated current	Meas. range	Resolution	Test current	Accuracy
10 mA	2,0...20,0 mA	0,1 mA	0,2 x I_Δn...2,0 x I_Δn	± 10% I_Δn
30 mA	6...60 mA	1 mA	0,2 x I_Δn...2,0 x I_Δn	± 10% I_Δn
100 mA	20...200 mA	1 mA	0,2 x I_Δn...2,0 x I_Δn	± 10% I_Δn
300 mA	60...600 mA	1 mA	0,2 x I_Δn...2,0 x I_Δn	± 10% I_Δn
500 mA	100...1000 mA	1 mA	0,2 x I_Δn...2,0 x I_Δn	± 10% I_Δn

measurement for positive or negative half-periods of forced leakage current
I_Δn - rated residual current

Insulation resistance measurements

Measuring range acc. to IEC 61557-2:

for U_n = 50 V: 50 kΩ...250 MΩ
for U_n = 100 V: 100 kΩ...500 MΩ
for U_n = 250 V: 250 kΩ...999 MΩ
for U_n = 500 V: 500 kΩ...2 GΩ
for U_n = 1000 V: 1 MΩ...4,99 GΩ

Display range *)	Resolution	Accuracy
0,00...1999 kΩ	1 kΩ	±(3% m.v. + 8 digits)
2,00...19,99 MΩ	0,01 MΩ	±(3% m.v. + 8 digits)
20,0...199,9 MΩ	0,01 MΩ	±(3% m.v. + 8 digits)
200...999 MΩ	1 MΩ	±(3% m.v. + 8 digits)
1,00...4,99 GΩ	0,01 GΩ	±(4% m.v. + 6 digits)
5...9,99 Ω	0,01 GΩ	unspecified

*) not greater than measuring range for given voltage

Low-voltage measurement of resistance and circuit continuity Measurement of protective conductor continuity with the ±200 mA current, IEC 61557-4: 0,12...400 Ω

Display range	Resolution	Accuracy
0,00...19,99 Ω	0,01 Ω	±(2% m.v. + 3 digits)
20,0...199,9 Ω	0,1 Ω	±(2% m.v. + 3 digits)
200...400 Ω	1 Ω	±(2% m.v. + 3 digits)

voltage on open terminals: 4…9 V
output current at R < 2 Ω: min. 200 mA
autocalibration of test leads
measurements for both current polarities

Illuminance measurement

Display range	Resolution	Accuracy
0,1...99,9 lx	0,1 lx	±(5% m.v. + 2 digits)
100...999 lx	1 lx	±(5% m.v. + 2 digits)
1,00...9,99 klx	0,01 klx	±(5% m.v. + 2 digits)
10,0...19,9 klx	0,1 klx	±(5% m.v. + 2 digits)

measurement in luxes (lx) or feet-candles (fc)

Three-phase recorder of electrical network parameters

The device is designed to work with networks:

with nominal frequency 50/60 Hz
with nominal voltage:
- 64/110 V
- 110/190 V
- 115/200 V
- 127/220 V
- 220/380 V
- 230/400 V
- 240/415 V
- 254/440 V
- 290/500 V
DC network

Supported networks:

single-phase
two-phase with common N conductor,
three-phase star connection N with and without conductor
three-phase delta

Parameters of analyzer:

Parameter		Measurement range	Max. resolution	Accuracy
Alternating voltage (TRMS)	-	0,0…500 V	0,01 % U_nom	±0,5% U_nom
Alternating current TRMS	-	depending on clamp*	0,01% I_nom	±2% m.v. for m.v. ≥ 10% I_nom ±2% I_nom for m.v. < 10% I_nom (error does not account for clamps error)
Frequency	-	40,00...70,00 Hz	0,01 Hz	±0,05 Hz
Active, reactive, apparent and distortion power	-	depending of configuration (trasformers, clamp)	up to for decimal places	depending of configuration (trasformers, clamp)
Active, reactive apparent energy	-	depending of configuration (trasformers, clamp)	up to for decimal places	as power error
cosφ and power factor (PF	-	0,00...1,00	0,01	±0,03
Harmonics	Voltage	as for alternating voltage	as for alternating voltage	±5% m.v. for m.v. ≥ 3% U_nom ±0,15% U_nom for m.v. < 3% U_nom
Harmonics	Current	as for alternating voltage	as for alternating voltage	±5% m.v. for m.v. ≥ 10% I_nom ±0,5% I_nom for m.v. < 10% I_nom
THD	Voltage	0.0...100.0% (in regards to the rms value)	0,1%	±5%
THD	Current	0.0...100.0% (in regards to the rms value)	0,1%	±5%
Voltage asymmetry	Voltage and current	0,0...10,0%	0,1%	±0,15% (absolute error)

* Clamp F-1A, F-2A, F-3A: 0..3000 A (10000 A_p-p )
* Clamp C-4A: 0..1000 A (3600 A_p-p )
* Clamp C-5A: 0..1000 A (3600 A_p-p )
* Clamp C-6A: 0..10 A (36 A_p-p )
* Clamp C-7A: 0...100 A (360 A_p-p )

Clamps	C-4A WACEGC4AOKR	C-5A WACEGC5AOKR	C-6A WACEGC6AOKR	C-7A WACEGC7AOKR	F-1A WACEGF1AOKR	F-2A WACEGF2AOKR	F-3A WACEGF3AOKR
Rated current	1000 A AC	1000 A AC 1400 A DC	0 A AC	100 A AC	3000 A AC	3000 A AC	3000 A AC
Max. overload current	1200 A AC	1000 A AC 3000 A DC	20 A AC	100 A AC	10 kA AC	10 kA AC	10 kA AC
Minimal measurable current	100 mA	500 mA	10 mA	20 mA	1 A	1 A	1 A
Frequency	30 Hz…10 kHz	DC…5 kHz	40 Hz…10 kHz	40 Hz…1 kHz	40 Hz…10 kHz	40 Hz…10 kHz	40 Hz…10 kHz
Imput signal level	1 mV / 1 A	1 mV / 1 A	100 mV / 1 A	500 mV / 1 A	38,8 μV / 1 A	38,8 μV / 1 A	38,8 μV / 1 A
Max. diameter of measured cord	52 mm	39 mm	20 mm	24 mm	360 mm	235 mm	120 mm
Minimal basic accuracy	≤0,5%	≤1,5%	≤1%	0,5%	1%	1%	1%
Battery power supply	—	+	—	—	—	—	—
Lead length	2,2 m	2,2 m	2,2 m	3 m	2,2 m	2,2 m	2,2 m
Measurement category	IV 300 V	IV 300 V	IV 300 V	III 300 V	IV 600 V	IV 600 V	IV 600 V

京海兴乐科技（北京）有限公司

公司主要提供UT（超声）MT（磁粉）PT（渗透）RT（射线）等设备及周边耗材

主要经营品牌：美国奥林巴斯OLYMPUS（原泛美）、美国GE（原德国KK）、美国磁通Magnaflux

超声电子、SIUI、瑞典兰宝、美国SP公司、美国达高特、德国MR、英国易高、新美达、船牌、等等

提供的无损检测仪器设备主要有超声波探伤仪、相控阵探伤仪、超声波测厚仪、TOFD探伤仪、超声波探头、相控阵探头、涡流探伤仪、涡流探头、涡流阵列探伤仪、磁粉探伤仪、磁粉、紫外线灯、照度计、工业扫查器、航空航天检测系统、着色渗透剂、荧光渗透线、工业内窥镜、工业显微镜、光谱（合金）分析仪、工业X光机、工业CT、CR、DR、工业洗片机、管材的无损检测解决方案、复合材料超声波自动化检测、超声波板材/管材检测系统、大型压力容器超声波检测系统、汽车点焊超声波检测设备，以及其它各类型分析检测仪器。

长期以来，依托高素质的技术人员和销售队伍，本着诚信守法，客户*的经营原则，以良好的信誉、丰富的经验、周到的服务，为客户提供了*的检测设备及技术解决方案，赢得了国内外广大用户的信赖和好评。我们提供的设备、系统及方案应用于中国的各种*工业领域，

用户行业包括航空航天，核能电力，船舶制造，海洋石油，石油化工，机械制造，铁路交通，进口商检，技术监督，高校及研究机构等。依托高素质的技术人员和销售队伍，本着守法，诚信，客户*的经营原则，公司以良好的信誉，周到的售前和售后服务，赢得了广大用户的信赖和好评。

上一篇：波兰索耐SONEL/MRU-120HD接地电阻测试仪

下一篇：中国台湾固纬INSTEK/GPT-9513多通道耐压测试仪

返回列表>>

Specifications – photovoltaic installation parameters

Open circuit voltage UOC

Specifications – electrical installation parameters

Measurement of short circuit loop impedance ZL-PE, ZL-N, ZL-LTest current: 23/40 A; measuring range acc. to IEC 61557: 0,13...1999,9 Ω (for 1.2 m test lead):

Three-phase recorder of electrical network parameters

张经理

Open circuit voltage U_OC

Measurement of short circuit loop impedance Z_L-PE, Z_L-N, Z_L-L
Test current: 23/40 A; measuring range acc. to IEC 61557: 0,13...1999,9 Ω (for 1.2 m test lead):